研發績效

期刊: 13 筆

獲獎: 0 筆
研討會: 42 筆

技術報告: 0 筆
專書: 0 筆

計畫案: 0 筆

2012


期刊   Small-scale projection lap-joint welding of KOVAR alloy and SPCC steel, Journal of the Chinese Institute of Engineers

2011


研討會   陳永昌*, 黃馨慧, 謝清旭, 林佳賓, Determination of kingpin Axis from Wheel Points Using Dual Quaternion Analysis, World Congress on Engineering, London, 中華民國
研討會   陳永昌*, 黃馨慧, 懸吊系統撓性元件對縱向運動參數影響之研究, 中華民國第十六屆車輛工程學術研討會, 台北, 中華民國
研討會   陳永昌*, 黃馨慧, 懸吊系統撓性元件對側向運動參數影響之研究, 中國機械工程學會第二十八屆全國學術研討會, 台中, 中華民國
期刊   Micro Plasma Arc Welding of AM 350 Precipitation Hardening Alloys, Applied Mechanics and Materials
期刊   Cr2O3 Flux Assisted Tig Welding of Type 316L stainless Stell Plates, Applied Mechanics and Materials
期刊   Application of vector finite screw analysis to determine the roll centre from wheel points, Journal of Mechanical Engineering Science Journal of Machine Design and Research

2010


研討會   陳永昌*, 陳尚揚, 謝清旭, 林佳賓, 麥花臣前懸吊系統機構設計參數之研究, 中國機械工程學會第二十七屆全國學術研討會, 台北, 中華民國
研討會   陳永昌*, 洪偉俊, 楊京泰, 6061-T6鋁合金摩擦攪拌銲接變形之研究, 台灣銲接學會99年度會員大會暨論文發表會, 屏東, 中華民國
研討會   陳永昌*, 黃馨慧, 楊京泰, 林佳賓, Strut-SLA前懸吊系統撓性參數對運動參數影響之研究, 中華民國第十五屆車輛工程學術研討會, 台南, 中華民國
期刊   Discussion on Simulated Application of Vehicle Suspension System Design, Journal of Machine Design and Research, 1-4

2009


研討會   陳永昌*, 黃馨慧, 劉冠志, 林佳賓, 應用ADAMS/Car模擬車量底盤動態特性之分析, 中華民國第十四屆車輛工程學術研討會, 雲林, 中華民國
研討會   陳永昌*, 陳尚揚, 金屬薄膜微電阻點銲電極參數分析, 中國機械工程學會第二十六屆全國學術研討會, 台南, 中華民國, 47-52
研討會   陳永昌*, 洪偉俊, 汽車用鋁合金與鎂合金摩擦攪拌銲接翹曲特性之研究, 中華民國第十四屆車輛工程學術研討會, 雲林, 中華民國
研討會   陳永昌*, 曾光宏, 謝其昌, 林建宏, Tool Design and Thermo-Mechanical Modeling of Friction Stir Spot Welding, International Conference on Welding and Joining Technologies, Ankara, 中華民國

2008


研討會   陳永昌*, 謝其昌, 洪德傑, A Study of Micro-scale Resistance Butt Welding of AISI 316 Stainless Steel Fine Wire, The 6th Asian Pacific IIW International Congress, Graz, 中華民國
研討會   陳永昌*, 謝其昌, 廖俊偉, 吳以德, 繞射光學元件應用於LED前車燈設計之研究, 中華民國第十三屆車輛工程學術研討會, 台北, 中華民國

2007


研討會   謝其昌*, 陳永昌, 李彥輝, 顏仲崑, 陳雯斐, 壓力感測器溫度補償之研究, 中華民國第十二屆車輛工程學術研討會, 屏東, 中華民國
研討會   陳永昌*, 魏君諺, 林琦鈞, 黏貼式光纖光柵感測器應用於複合材料量測之特性研究, 中華民國第十二屆車輛工程學術研討會, 屏東, 中華民國
研討會   陳永昌*, 鄭育昇, 林建宏, 應用微電阻銲於金屬細線搭接之銲接參數分析, 中華民國第二十四屆機械工程學術研討會, 桃園, 中華民國
研討會   陳永昌*, 謝其昌, 鄭育昇, Nugget Analysis of Micro-Scale Resistance Spot Welding on Stainess Steel Foil, The 5th Asian Pacific IIW International Congress, 雪梨, 中華民國
期刊   Quantitative Detection of Inside Defect in Automotive Tire by Interferographic Technique, Research in Nondestructive Evaluation, Vol. 18, 163-177

2006


研討會   顏仲崑, 陳永昌*, 陳太平, 李介廷, 李彥輝, 林建宏, 謝其昌, 整合微霧化器於FD-ESI 質譜分析儀之製作, 中華民國力學學會第三十屆全國力學會議, 彰化, 中華民國
研討會   胡惠文*, 陳永昌, 王栢村, 楊忠霖, 大客車車體結構焊接之模擬與分析-(I)結構剛性分析, 中華民國力學學會第三十屆全國力學會議, 彰化, 中華民國
研討會   胡惠文*, 陳永昌, , 王栢村, 大客車車體結構焊接之模擬與分析-(II)結構翻覆碰撞分析, 中華民國力學學會第三十屆全國力學會議, 彰化, 中華民國
研討會   曾全佑, 陳永昌*, 王土發, Quality Monitoring for Micro Resistance Stop Welding,, 12th IFToMM World Congress, Besancon, 中華民國
研討會   陳永昌*, 魏君諺, 發光二極體汽車尾燈水紋花紋設計之探討, 第四屆精密機械與製造技術研討會, 屏東, 中華民國, 1-6
研討會   陳永昌*, 陳太平, 謝其昌, 洪德傑, Characteristics of Small-Scale Resistance Spot Welding of Kovar Alloy, The First South-East Asia International Institute of Welding Congress, Bangkok, 中華民國
研討會   陳永昌*, 謝其昌, 王翔正, Investigation of Microstructure in Resistance Projection Welds of Kovar Alloy and SPCC Steel, 6th European Conference on Welding, Santiago de Compostela, 中華民國
研討會   陳永昌*, 胡惠文, 王栢村, 楊忠霖, 大客車車體結構和皆知模擬與分析-(I)結構鋼性分析, 中華民國力學學會第三十屆全國力學會議, 彰化, 中華民國
研討會   陳永昌*, 曾全佑, , 王土發, An On-Line Monitoring System for Micro Resistance Stop Welding, 首屆北京科技大學與屏東科技大學海峽兩岸學術論壇, 北京, 中華民國
期刊   Stability of PBGA Package’s Warpage Subjected to Hygro-thermal loading, Microelectronics Reliability, Vol. 46, 1139-1147

2005


研討會   曾全佑*, 陳永昌, 黃昱仁, 汽車起動馬達電磁閥開關接點之失效分析法, 中華民國第十屆車輛工程學術研討會, 台北, 中華民國, 1-5
研討會   曾全佑*, 陳永昌, 劉志賢, 使用中柴油車氮氧化物排放水準之分析, 中華民國第十屆車輛工程學術研討會, 台北, 中華民國, 1-6
研討會   陳永昌*, 周業興, 王翔正, 曾光宏, 林宗漢, Kovar合金與SPCC鋼薄板之小型電阻浮凸縫銲研究, 台灣銲接協會年會, 彰化, 中華民國, 1-6

2004


研討會   錢志回*, 陳宗輝, 陳永昌, 謝其昌, 吳以德, 溫度幅度變化對覆晶封裝溫度循環測試之影響, 中華民國力學學會第二十八屆全國力學會議, 台北, 中華民國, 2817-2824
研討會   謝其昌, 潘正堂, 錢志回, 陳永昌*, 楊聰明, An Investigation and Analysis on Forming Feature of the Micro-ball Lens Array by Novel Batch-fabrication Technique, The 2nd Conference on Precision Machinery and Manufacturing Technology, 中華民國, 133-141
研討會   陳永昌*, 謝其昌, 吳以德, The Effect of Moisture on Adhesion Features of the Underfill/solder mask/substrate Joint, SEM X International Congress & Exposition on Experimental and Applied Mechanics, California, 中華民國
研討會   陳永昌*, 王翔正, 周業興, 曾光宏, Kovar與碳鋼應用小型電阻浮凸銲之微結構分析, 中國機械工程學會第二十一屆全國學術研討會, 高雄, 中華民國, 1-6
研討會   陳永昌*, 潘正堂, 周業興, 謝其昌, 謝清泓, 微球透鏡製作與光學特性之模擬, 中國機械工程學會第二十一屆全國學術研討會, 高雄, 中華民國, 1-6
研討會   陳永昌*, Investigations of the Mixed-mode Fracture of IC Package Interfaces, SEM X International Congress & Exposition on Experimental and Applied Mechanics, California, 中華民國
期刊   Numerical Method to Predict and Fabricate Aspherical Micro-lens Array Using 248nm Excimer Laser Ablation, Journal of Microlithography, Microfabrication and Microsystems, Vol. 3, No. 4, 555-562

2003


研討會   錢志回*, 陳永昌, 吳以德, 謝其昌, 邱以泰, Investigation of the Adhesion Strength of Underfill/Solder Mask/Substrate Joints Under Thermal Cycling, SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Charlotte, North Carolina, 中華民國, 1-8
研討會   陳永昌, 錢志回*, 吳以德, 謝其昌, Nano-scale Measurement using the Direct Gray-level Method by Holographic Interferometry, SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Charlotte, North Carolina, 中華民國, 1-8
研討會   陳永昌*, 應用全像干涉術量測覆晶構裝體填充膠與基板介面缺陷之研究, 精密機械與製造技術研討會, 中華民國
研討會   光纖連接器之終端模組受熱循環負載下應力及疲勞壽命之研究, 第二十七屆中華民國力學學會年會暨全國力學會議, 中華民國

2002


研討會   The Effect of Moisture on the Interfacial Adhesion of IC Packages, International Symposium on Experimental Mechanics, 中華民國
研討會   接合填充膠/防焊漆/基板經溫度循環黏著強度之研究, 第二十六屆全國力學會議, 中華民國
研討會   應用全像干涉術於輪胎內部缺陷之檢測, 第二十六屆全國力學會議, 中華民國

2000


研討會   屏東縣柴油車黑煙平均排放量之研究, 中華民國第十五屆技職研討會, 中華民國