研發績效
期刊: 41 筆
獲獎: 16 筆 |
研討會: 19 筆
技術報告: 0 筆 |
專書: 0 筆
計畫案: 21 筆 |
2024
期刊
Preparation of uniform Ag nanoparticles with enhanced plasmon resonance intensity and antibacterial efficiency via two-step dewetting process, Optics & Laser Technology, Elsevier, 0, 168, 10988-
2023
研討會
Laser-induced surface enhanced Raman scattering performance of silver films, The 24th International Symposium on Laser Precision Microfabrication (LPM2023), Hirosaki, 日本
研討會
Effect of laser treatment on surface properties of CoCrMo alloys, The 24th International Symposium on Laser Precision Microfabrication (LPM2023), Hirosaki, 日本
研討會
Analysis of surface characteristics of TNTZ by high-pressure torsion and laser texture, The 24th International Symposium on Laser Precision Microfabrication (LPM2023), Hirosaki, 日本
獲獎
2023全國磨潤科技實務技術競賽佳作, 臺灣磨潤科技學會, 中華民國
獲獎
111學年度研究生成果獎, 屏科大, 中華民國
期刊
Wear behavior of copper and stainless steel butt joints fabricated by laser oscillation welding, The International Journal of Advanced Manufacturing Technology, 0, 0
期刊
Optimization and characterization of T joint laser welds for aluminum fin heat sink with copper base, The International Journal of Advanced Manufacturing Technology, 0, 124, 2323-2333
期刊
Laser-induced surface plasmon resonance and SERS performance of AgCuAl medium entropy alloy films, Mater. Letters, 0, 333, 13370-
期刊
Laser-induced silver nanoparticles with HfO2 shell for melamine detection, Sensors and Actuators A: Physical, Elsevier, 364, 0
期刊
Effects of metal film coatings on surface properties of laser-textured stainless steel, Surface & Coatings Technology, 461, 0, 12944-
期刊
Development and Fabrication of Biocompatible Ti-Based Bulk Metallic Glass Matrix Composites for Additive Manufacturing, Materials, MDPI, 0, 16, 5935-
2022
獲獎
110學年度研究生研究成果獎勵, 屏科大, 中華民國
獲獎
海報論文競賽佳作, 台灣鍍膜年會, 中華民國
獲獎
國家科學及技術委員會111年度補助大專校院研究獎勵, 國家科學及技術委員會, 中華民國
期刊
Surface resonance properties of thin silver films with nanoparticles induced by pulsed‑laser interference dewetting process, The International Journal of Advanced Manufacturing Technology, 0, 120, 377-384
期刊
Study on the surface modification of nanostructured Ti alloys and coarse-grained Ti alloy, Metals, 12, 948, 1-19
期刊
Mechanical and microstructural properties of dissimilar copper and stainless-steel butt welds prepared using zigzag and circular fiber laser oscillation methods, Materials Science and Engineering A, 859, 144178
期刊
Laser dewetting mechanism and antibacterial properties of Cu-Al based medium entropy alloy films, Journal of Alloys and Compounds, 903, 163893, 1-12
2021
獲獎
2021全國磨潤科技實務技術競賽優等, 磨潤科技應用產學聯盟, 中華民國
期刊
Microstructure and optical properties of AgCuAl medium entropy films with nanoparticles induced by pulsed-laser dewetting, Surface & Coatings Technology, 0, 421
期刊
Effects of accumulated energy on nanoparticle formation in pulsed-laser dewetting of AgCu thin films, Nanoscale Research Letters, 0, 16:110, 1-11
期刊
Design of Customize Interbody Fusion Cages of Ti64ELI with Gradient Porosity by Selective Laser Melting Process, micromachines, 12, 307, 1-20
2020
研討會
林鉉凱*, 盧威華, 退火製程對於二氧化鈦薄膜光催化降解亞甲藍之研究, 109年中國材料科學學會年會, 新北市, 中華民國
期刊
Surface resonance properties of pure Cu and Cu80Zr20 metallic glass films with nanoparticles induced by pulsed-laser dewetting process, Applied Surface Science, Elsevier, 507, 14518-
期刊
Effects of Mg content and thermal treatments on optoelectronic and bending properties of transparent conductive indium tin oxide/AgMg bi-layer film, Thin Solid Films, Elsevier, 697, 13784-
期刊
Construction of Raman spectroscopic fingerprints for the detection of Fusarium wilt of banana in Taiwan, Plos ONE, Public Library of Science, CA, USA, 20-31
期刊
Antifungal Properties of Pure Silver Films with Nanoparticles Induced by Pulsed-Laser Dewetting Process, APPLIED SCIENCES, MDPI, 2260-
2019
研討會
林鉉凱*, 二元與三元鋯基金屬薄膜退火後之光電特性, 2019材料年會, 台南, 中華民國
研討會
Controllable Ag particles fabricated by high repetition rate laser, The 8th International Congress on Laser Advanced Materials Processing, 廣島, 日本
獲獎
107學年度研究生研究成果, 屏科大, 中華民國
期刊
Processing of CP-Ti by high-pressure torsion and the effect of surface modification using a post-HPT laser treatment, Journal of Alloys and Compounds, 784, 653-659
期刊
Effects of thermal treatment on optoelectrical properties of AZO/Ag-Mg-Al thin films, Applied Surface Science, 467, 249-254
期刊
Effects of different annealing processes on optoelectronic and bending fatigue properties of AgZr and ITO/AgZr thin film metallic glass, Optics and Lasers in Engineering, 115, 100-106
期刊
Crystalline characteristics of annealed AlN films by pulsed laser treatment for solidly mounted resonator applications, Chemistry Central Journal (BMC Chemistry), 13, 13:30
2018
研討會
Effects of Zr element additions and annealing treatment on optical and electrical properties of Cu-based films, XIV International Conference on Nanostructured Materials (NANO 2018), 香港, 香港
研討會
Effects of Mg content and annealing temperature on electrical and optical properties of ITO/AgMg films, The 25th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018), 羅馬, 義大利共和國
期刊
Effects of Mg content and annealing treatment on optical and electrical properties of CuMg and ITO/CuMg metallic glass films, Journal of Alloys and Compounds, 731, 248-252
2017
研討會
Laser patterning on lithium disilicate dental ceramics, The 18th International Symposium on Laser Precision Microfabrication (LPM), 富山市, 日本
研討會
Effects of laser treatment power and wavelength on crystal quality of AlN films for acoustic wave filter applications, The 18th International Symposium on Laser Precision Microfabrication (LPM), 富山市, 日本
研討會
Effects of Ti element additions and annealing treatment on optical and electrical properties of Cu-based films, IUMRS?ICA 2017, 台北, 中華民國
研討會
Effects of Mg content and annealing treatment on optical and electrical properties of CuMg and ITO/CuMg metallic glass films, The 24th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2017), 多若斯迪亞, 西班牙王國
獲獎
2018 Albort Nelson Marquis 終身研究獎, Marquis Who's Who, 美國
期刊
Microstructure and mechanical properties of open-cell porous Ti-6Al4V fabricated by selective laser melting, Journal of Alloys and Compounds, 248-254, ----
期刊
Effect of laser parameters on optoelectronic properties of polycrystalline silicon films prepared by two-step annealing process, The International Journal of Advanced Manufacturing Technology, ----, ----
期刊
Design of Interbody Fusion Cages of Ti6Al4V with Gradient Porosity Using a Selective Laser Melting Process for Spinal Fusion Arthroplasty, Journal of Laser Micro/Nanoengineering, 12, ----
期刊
Characterization of local laser bonding quartz to anodic aluminum oxide in light emission device, Optical and Quantum Electronics, 49, ----
期刊
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting, Mater. Sci. Eng. A, vol. A682, ----
2016
研討會
Effects of laser parameters on optoelectronic properties of polycrystalline silicon films prepared by two-step annealing process, The 8th International Conference on Technological Advances of Thin Films & Surface Coatings, Singapore, 新加坡共和國
研討會
Dependence of film thickness and laser annealing parameters on the optical and electrical properties of ITO/metallic glass alloy bi-layer films, International Conference on Processing & Manufacturing of Advances Materials (Thermec’ 2016), Graz, 澳大利亞
研討會
不同鎂含量銅基金屬玻璃光電特性之研究, 不同鎂含量銅基金屬玻璃光電特性之研究, 新竹, 中華民國
獲獎
2016輕金屬創新應用競賽,材料替代[跨系組] 第一名, 經濟部工業局, 中華民國
獲獎
材料科學學會材料創新獎第二名, 中國材料科學學會, 中華民國
獲獎
屏科大靜岡理工兩校交流會專題發表競賽第二名, 屏科大靜岡理工兩校, 中華民國
獲獎
光寶創新獎佳作, 光寶科技, 中華民國
期刊
Selective electrode patterning of ITO films using pulsed ultraviolet laser, Optical and Quantum Electronics, 48:90, ----
期刊
Properties of ITO films deposited on cholesteric liquid crystal layer by two-step DC magnetron sputtering, Optical and Quantum Electronics, 48:496, 10
期刊
Frequency Modulation and Device Repaired by Laser Treatment in Film Bulk Acoustic Filters, Journal of Laser Micro/Nanoengineering, 11, ----
期刊
Biomimetic Coatings on Fiber Laser Modified Ti-6Al-4V Surfaces, Journal of Laser Micro/Nanoengineering, 11, ----
2015
研討會
Selective electrode patterning of ITO films using pulsed ultraviolet laser”, International Conference on Micro/Nano Optical Engineering, Light Conference: ICOME-T2015, 台南, 中華民國
研討會
Patterning process of transparent ITO-metallic glass bi-layer by pulsed laser, The 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2015), 巴黎, 法國
研討會
Frequency Modulation and Device Repaired by Laser Treatment in Film Bulk Acoustic Filters, The 7th International Congress on Laser Advanced Materials Processing (LAMP 2015), 九州, 日本
研討會
單晶矽經不同雷射退火處理後之光電性質研究, 屏東科技大學暨北京科技大學第十屆學術交流研討會, 屏東, 中華民國
獲獎
20153D列印創新應用競賽銀牌, 國家實驗研究院國家高速網路與計算中心, 中華民國
獲獎
104學年度校慶校園路跑 第10名, 屏東科技大學, 中華民國
獲獎
辦理學生兼任助理權益保障配套措施業務 嘉勉一次, 屏東科技大學, 中華民國
獲獎
辦理學生兼任助理權益保障配套措施業務 嘉勉一次, 屏東科技大學, 中華民國
期刊
Effects of Laser Annealing Parameters on Optical and Electrical Properties of ITO/Metallic Glass Alloy Bi-layer Films, Nanoscale Research Letters, ----, ----
2014
期刊
A study on electric properties for pulse laser annealing of ITO film after wet etching, Thin Solid Films, 522, 330-335
2013
期刊
Improved bending fatigue behavior of flexible PET/ITO film with thin metallic glass interlayer, Materials Letters, 113, 182-185
期刊
Effect of wavelength on the laser patterning of a cholesteric liquid crystal display electrode, Thin Solid Films, 529, 222-225
2012
期刊
Pulsed laser micromachining of Mg–Cu–Gd bulk metallic glass, Optics and Lasers in Engineering, 50, 883-886
期刊
Electrospun Hierarchical Cancellous-Bone-Like Microstructures Composed of a Crystalline TiO2 Nanonet, Mater. Letters, 82, 64-66
期刊
Effect of wavelength on patterning the electrode of cholesteric liquid crystal display, Thin Solid Films
期刊
Effect of small amount of active Ti element additions on microstructure and property of Sn3.5Ag0.5Cu solder, Mater. Sci. Eng. A, 558, 478-484
期刊
Driving cholesteric liquid crystal display by pulsed laser, Journal of Laser Micro/Nanoengineering, 7, 112-114