Biblio

Journal: 41 Items

Prize: 0 Items 		Symposium: 89 Items

Technology Report: 0 Items 		Book: 0 Items

Project: 12 Items

2022

Symposium   Chao Chih-Yeh*, Study on tempering welding performance of 17-4PH stainless steel and SUP10 spring steel dissimilar metal,
Symposium   Chao Chih-Yeh*, Effect of Heat Treatment on Biocompatibility of Ti-20Hf in α Phase Region Influence,

2021

Symposium   Chao Chih-Yeh*, Morphological Analysis of Ti2Cu in Ti-1.8Cu and Ti-5Cu Alloys,
Journal   Microstructure evolution and mechanical property response of 3d-printed scalmalloy with different heat-treatment times at 325◦c,
Journal   Effects of ag-rich nano-precipitates on the antibacterial properties of 2205 duplex stainless steel,
Journal   Effect of low copper addition to as-forged 304 stainless steel for dental applications,
Journal   Cd44 promotes lung cancer cell metastasis through erk–zeb1 signaling,

2020

Journal   Mg-Zn-Ca Alloys for Hemostasis Clips for Vessel Ligation: In Vitro and In Vivo Studies of Their Degradation and Response,
Journal   Heat-treatment effects on mechanical properties and microstructure evolution of Ti-6Al-4V alloy fabricated by laser powder bed fusion,
Journal   Effect of Ti2Cu precipitation on antibacterial property of Ti-5Cu alloy,
Journal   Effect of Phase Distribution on the Antibacterial Property and Cytotoxicity of Ti-5Al-2.5Cu Alloy after Heat Treatment at Various Temperatures,
Journal   A Study of Low Young’s Modulus Ti-15Ta-15Nb Alloy Using TEM Analysis,
Journal   Effects of various polishing techniques on the surface characteristics of the ti-6al-4v alloy and on bacterial adhesion,

2019

Journal   Influence from Size and Morphology of Mn5Si3 on Wear Resistance of Cu-Zn-Al-Mn-Si Alloys,

2018

Symposium   ,
Symposium   ,
Symposium   ,
Journal   Microstructure and elastic modulus evolution of TiTaNb alloys,

2017

Symposium   The study on correlation among electric potential of different materials of crown in different corrosion status (artificial saliva),
Symposium   M23C6碳化物之方向關係,
Symposium   鈦-50鋯鑄造合金的晶體與型態關係,
Symposium   鈦-1.8銅合金析出物對於抗菌性之影響,
Symposium   異種牙冠腐蝕特性分析,
Symposium   新型鐵基不銹鋼鐵桿頭合金開發,
Symposium   新型鈦-15鈮-(0,1,2,3)銀合金生醫特性分析,
Symposium   改善球頭鈦-8鋁-1鉬-1釩合金焊道熱影響區,
Symposium   密度8.5球頭合金開發,
Symposium   不同N含量對17-4PH性質影響,
Symposium   不同熱處理對6-4鈦3F列印塊材機械性質的影響,
Journal   Antibacterial Properties and Corrosion Resistance of the Newly Developed Biomaterial, Ti-12Nb-1Ag,

2016

Symposium   The effects of precipitation Ti2Cu on antimicrobial property and corrosion resistance of Ti5Cu alloy,
Symposium   Research of Biomedical Property on Stainlessbased Dental Devices with Fe22Cr5NiXAg Alloy,
Symposium   Effects of Copper Addition on the Antibacterial Property of As-cast AISI304SS,
Symposium   Biocompatibility of the Ti-15Ta-15Nb alloy,
Symposium   Antibacterial Property and Corrosion Resistance of the Ti-12Nb-1Ag Alloy,
Symposium   2205不銹鋼奈米銀析出特徵,
Symposium   2041不銹鋼之機械特性暨高爾夫球頭之應用評估,
Symposium   鈦64與鈦6222雙相合金之顯微結構與E.Coli抗菌相關性,
Symposium   鈦-15鉭-15鈮合金抗菌性分析,
Journal   Effects of Cr2N Precipitation on the Antibacterial Properties of AISI 430 Stainless Steel ,

2011

Symposium   Chao Chih-Yeh, Lu Wei-Hua*, Precipitation Behavior of the Grain Boundaries on Fe-Al -Mn Alloy,
Symposium   Chao Chih-Yeh, Lu Wei-Hua*, Phase Transformations Fe-4Cr-18Ni -20Co-0.15C alloy,
Symposium   Chao Chih-Yeh, Lu Wei-Hua*, Phase Transformation on Fe-20Mn-6Al -4Ni -3Cr-0.5C Alloy,
Symposium   Chao Chih-Yeh, Lu Wei-Hua*, Dislocation Characterization on Fe-15Cr-5Ni -5Mn Alloy,
Symposium   Chao Chih-Yeh*, Ti-8Al-1V-1Mo Alloy,
Symposium   Chao Chih-Yeh*, Study of the Laser Repair Welding on Ti-6Al -4V Alloy,
Symposium   Chao Chih-Yeh*, Microstructure of Annealed Ti -9Al -1Mo-1V Alloy,
Symposium   Chao Chih-Yeh*, Damping Properties and Microstructure Vibration On Ti -20V-4Al -1Sn Alloy,
Symposium   Chao Chih-Yeh*, ANNEALED STRUCTURE OF THE TI-8AL-1V-1MO ALLOY,
Symposium   Chao Chih-Yeh*, ω Phase Observations on Ti -4.5Al -3Cr-2Mo-1V Alloy,
Journal   Influence of titanium addition on the microstructure of the novel ferrous-based stainless steel,
Journal   Effects of C and Cr content on high-temperature microstructures of Fe–9Al–30Mn–xC–yCr alloys,

2009

Journal   Research of microstructure and mechanical behavior on duplex (α+β) Ti–4.8Al–2.5Mo–1.4V alloy,
Journal   Phase transformation of high temperature on Fe–Al–Mn–Cr–C alloy,
Journal   Effects of cobalt content on the microstructures of Fe-9Al-30Mn-1C-xCo alloys,

2008

Symposium   Chao Chih-Yeh*, , Ti-6Al-4V 合金雷射焊接高溫顯微結構分析,
Symposium   Chao Chih-Yeh*, , 鐵-5 鉻-2 錳-1 矽-0.15 碳+1(鈦鈮 鉬)合金性質分析,
Symposium   Chao Chih-Yeh*, , 鐵-17鉻-6鎳-0.2氮性質分析,
Symposium   Chao Chih-Yeh*, , 鐵-12鉻-11鎳-1.5鈦-1鉬合金相變化,
Symposium   Chao Chih-Yeh*, , 鐵-11鉻-7.5鎳-1.5銅-0.5矽-0.5錳合金之特性分析,
Symposium   Chao Chih-Yeh*, , 鐵-10鎳-4.6鉻-1鈷-1錳-1鉬-0.87鈦-0.8鈮-0.26鋁-0.12碳合金特性分析,
Symposium   Chao Chih-Yeh*, , , 475不銹鋼顯微結構分析,
Symposium   Chao Chih-Yeh*, , , 鐵-5 鉻-2 鉬-0.5 鈦-0.3 鋁-0.2 碳-4.5 鎳合金特性分析,
Symposium   *, Chao Chih-Yeh, 鐵-8鋁-15錳-1矽-0.4碳合金相變化,
Journal   Fe-11Cr-8.5Co-8Ni-5Mo-1.25Al合金相變化與性質分析,

2007

Symposium   Chao Chih-Yeh, *, 鐵-17鉻-6鎳-0.2氮合金性質分,
Symposium   *, Chao Chih-Yeh, 鐵-9鋁-x碳合金性質分析,
Symposium   *, Chao Chih-Yeh, 鐵-11鉻-8.5鈷-8鎳-5鉬-1.25鋁合金相變化與性質分析,
Symposium   *, Chao Chih-Yeh, 鎳-19鐵-17鉻-5鈮-3鉬-1鈦-0.5鋁合金特性分析,
Symposium   *, Chao Chih-Yeh, 鈦-5鋁-4鉻-4鉬-2錫-2鋯合金性質分析,
Symposium   *, Chao Chih-Yeh, 鈦-5釩-3鋁合金特性分析,
Symposium   *, Chao Chih-Yeh, 鈦-4.5鋁-1.5鉬-1.2釩-0.5鐵合金性質分析,

2006

Symposium   *, Chao Chih-Yeh, The Researches in High Energy Welding Properties of the Fe-Al-Mn Alloy,
Symposium   *, Chao Chih-Yeh, The Analysis of the Phase Transformation of the Fe-8.7Al-28.3Mn-1C-5.5Cr Alloy,
Symposium   *, Chao Chih-Yeh, The Analysis of the Phase Transformation of the Fe-8.7Al-28.3Mn-1C-5.5Cr Alloy,
Symposium   *, Chao Chih-Yeh, The Analysis of κ Phase Structure of the Fe-Al-Mn Alloy,
Symposium   *, Chao Chih-Yeh, THE DAMPING PROPERTIES OF THE MAGNESIUM ALLOY,
Symposium   *, Chao Chih-Yeh, Phase Transformations of the Ti-5Al-4Cr-4Mo-2Zr-2Sn Alloy,
Journal   鎂-鋯合金相變化與阻尼比性質之分析,

2005

Symposium   Chao Chih-Yeh*, THE STUDY OF THE PROPERTIES OF THE FE-9AL-30MN-1C-3CR ALLOY,
Symposium   Chao Chih-Yeh*, THE PROPERTIES OF THE TI-20V-4AL-1SNALLOY,
Symposium   Chao Chih-Yeh*, THE DAMPING PROPERTIES OF THE MAGNESIUM ALLOY,
Symposium   Chao Chih-Yeh*, MECHANICAL BEHAVIOR AND MICROSTRUCTURE OF THE TI-4.8AL-2.5MO-1.4V ALLOY,
Symposium   Chao Chih-Yeh*, MACHINABILITY PROPERTIES OF THE FE-9AL-30MN-1C-3CR ALLOY,
Symposium   Chao Chih-Yeh*, EFFECTS OF CO ADDITIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE FE-9AL-30MN-1.0C ALLOY,
Symposium   Chao Chih-Yeh*, EFFECTS OF CARBON AND CHROMIUM ELEMENTS ON THE HIGH TEMPERATURE MICROSTRUCTURE OF THE FE-9AL-30MN ALLOY,
Symposium   The Studies of the Properties of the FE-9AL-30MN-1C-3CR Alloy,
Symposium   The Damping properties of The Magnesium Alloy,
Symposium   Mechanical Behaviour and Microstructure of the TI-4.8AL-2.5MO-1.4V Alloy,
Symposium   Machinability Properties of the FE-9AL-30MN-1C-3CR Alloy,
Symposium   Effects of The Nitrogen and Carbon Addition on The FE-CR-NI Duplex Alloy,
Symposium   Effects of Co Additions on The Microstructures and Mechanical Properties of the FE-9AL-30MN-1C Alloy,
Symposium   A Method of Making Ni-Cr Stainless Steel Damascus Bars,
Symposium   The Properties of the TI-20V-4AL-ISN Alloy,
Symposium   A Method of making Iron-Copper Damascus Bars,
Journal   Effects of Carbon and Chromium Elements on the High Temperature Microstructure of FE-9AL-30MN Alloy,

2004

Symposium   The Interfacial Characteristics on Cu to Nano-Al2O3 plate,
Symposium   Mechanical Properties and Sintering Characteristics of W-Ni-Fe-（Cr）powder for Metal Injection Molding,
Symposium   AZ91D鎂合金鑄件結構與振動特性分析,

2003

Symposium   鐵-9鋁-28錳-0.9碳-6鉻合金氧化膜生成之研究,
Symposium   鐵-8.5鋁-28.0錳-0.95碳-6鉻合金性質分析,
Symposium   鉻元素對鐵-9鋁-30錳-1碳合金固溶處理之影響,
Symposium   鈷元素對鐵鋁錳碳合金性質之影響,
Journal   Mechanical Behavior and Microstructural of Ti-5Al-2.5Mo-1.4V,
Journal   Effects of Co Additions on the Microstructure and Mechanical Properties of the Fe-9Al-30Mn-1.0C Alloy,

2002

Symposium   鐵-8鋁-30錳-1.0碳-1.0矽-3.0鉻合金銑削加工分析,
Symposium   鐵-28錳-9鋁-6鉻-0.9碳合金腐蝕性質分析,
Symposium   鈦-20釩-4鋁-1錫合金性質分析,
Symposium   振動模態分析實驗的試片尺寸對量測材料自然頻率之影響,
Journal   Effect of Mn Contents on the Microstructure and Mechanical Properties of the Fe-10Al-xMn-1.0C Alloy,
Journal   鈦元素對鐵鋁錳合金性質之影響,

2001

Symposium   Machinability of Fe-（4-12）Al-30Mn-1.0C Alloys,
Symposium   Effects of Process Parameters on the Properties of Shaw Mould,
Symposium   Effect of Solution Heat Treatment on the Mechanical Properties and Microstructures of the Fe-10.12Al-29.24Mn-0.98C Alloy,
Journal   The Study on the Mechanical Properties of Fe-9Al-30Mn-1C- Alloys,
Journal   The Development of the Fe-Al-Mn Steel for the Dies and Rollers of the Pelletizing Machine,
Journal   陶模溫度與尺寸精度關係之研究,
Journal   鐵-9鋁-30錳-1碳-（0-1.5）鈦合金之機械性質研究,

2000

Journal   Research of Solution Heat-Treated on AISI 316 Stainless Steel,

1999

Journal   Develop a Kind of Steel Alloy Rod of High Strength,
Journal   Determination of Golf Club Material Properties by Experimental Modal testing,
Journal   Analysis of Microstructure on Fe-10Al-(10~35)Mn-1.0C Alloy Sheet Castings,
Journal   鐵-10鋁-（10-35）錳-1.0碳合金薄片鑄件的顯微結構分析,
Journal   鐵鋁錳合金鋼棒研製分析,
Journal   金屬材料在堆肥環境中腐蝕速率及種類探討,
Journal   應用實驗模態分析於高爾夫球頭素料之材料性質測定,

1998

Symposium   Grain Boundary Precipitation in an Fe-11.89Al-29.02Mn-0.98C Alloy,
Journal   鐵-10鋁-30錳-1.0碳合金鑄件之切削性,

1997

Journal   合金元素對鐵鋁錳碳合金鑄件顯微結構的影響,

1996

Journal   Grain Boundary Precipitation Behaviors in An Fe-9.8, Al-28.6, Mn-0.8, Si-1.0C Alloy,